DigitEMB
Black Flame and Sparks Embroidery Design
Hoop Sizes:4x4 inches
Quantity:
An elongated black flame has open inner curves and several detached spark-shaped accents.
This is a digital machine-embroidery design. No physical garment, accessory or finished embroidered item is included.
SKU: E-20291
Design dimensions
The option names refer to the listed hoop sizes. The design itself has the dimensions shown below. Check your machine’s usable embroidery area before using the file.
| Listed hoop option | DST width × height | PES width × height |
|---|---|---|
| 4 × 4 inches | 50.8 × 96.4 mm (2.00 × 3.80 in) | 50.8 × 96.4 mm (2.00 × 3.80 in) |
| 5 × 5 inches | 63.6 × 121.8 mm (2.50 × 4.80 in) | 63.6 × 121.8 mm (2.50 × 4.80 in) |
| 6 × 6 inches | 76.6 × 147.4 mm (3.02 × 5.80 in) | 76.6 × 147.4 mm (3.02 × 5.80 in) |
| 8 × 8 inches | 102.6 × 198.0 mm (4.04 × 7.80 in) | 102.6 × 198.0 mm (4.04 × 7.80 in) |
Measurements are taken from DST and PES stitch coordinates. Small differences between formats are shown separately. Finished stitching may vary with fabric, stabilization and machine setup.
The checked archive contains DST and PES files. Confirm that your machine and embroidery software support the format you plan to use.