DigitEMB
Winged Devil Embroidery Design
A horned red-and-black fantasy figure has long pointed wings, a curled tail and one raised hand.
This is a digital machine-embroidery design. No physical garment, accessory or finished embroidered item is included.
SKU: E-22430
Design dimensions
The option names refer to the listed hoop sizes. The design itself has the dimensions shown below. Check your machine’s usable embroidery area before using the file.
| Listed hoop option | DST width × height | PES width × height |
|---|---|---|
| 4 × 4 inches | 85.2 × 96.7 mm (3.35 × 3.81 in) | 85.2 × 96.8 mm (3.35 × 3.81 in) |
| 5 × 5 inches | 107.2 × 122.2 mm (4.22 × 4.81 in) | 107.2 × 122.2 mm (4.22 × 4.81 in) |
| 6 × 6 inches | 129.6 × 147.6 mm (5.10 × 5.81 in) | 129.6 × 147.6 mm (5.10 × 5.81 in) |
| 8 × 8 inches | 173.6 × 198.4 mm (6.83 × 7.81 in) | 173.6 × 198.4 mm (6.83 × 7.81 in) |
Measurements are taken from DST and PES stitch coordinates. Small differences between formats are shown separately. Finished stitching may vary with fabric, stabilization and machine setup.
The checked archive contains DST and PES files. Confirm that your machine and embroidery software support the format you plan to use.
Dimensions describe the complete measured embroidery file, not an individually measured element of the composition.